The rust paint is recommended when the following circumstances occur. Rust is the result of a chemical reaction that occurs due to direct contact of oxygen particles with moisture, applied directly to a metal surface. The result of this contact is surface corrosion and subsequent weakening. If this deterioration process continues over time and no measures are taken to detect it, it will result in material breakdown.
Table of Contents
Elements needed to paint rust and first stage of the process
The machines that are most prone to rust are trucks and cars, especially the oldest ones. The more rust nodes in these vehicles, the more unsafe they are.
Repairing items that suffer the appearance of rust is usually very expensive and today we will give you some advice associated with the repair of this complication of metals in order to prevent and save some money.
The necessary elements to carry out the application of paint on rust are these:
- a wire brush, to be used to remove thicker, embossed layers of oxides;
- one sandpaper, which will be used after the first coat of the wire brush. Its function is merely polishing;
- a tag_strong will also be needed to cover rust cracks, which will work as a repairer of those parts that are really badly damaged;
- finally, a special metal oxide paint will be used , which will be used in the final phase of the process.
First, the rusted or rusty object should be placed in an open, ventilated place where a cleaning process will begin. In this process a deep cleaning of the surface is sought in order to eliminate grease residues, dirt and impurities. A special solvent can be used for this purpose. After this phase, the cleaned surface must wait about one hour until it is completely dry.
Importance of applying a rust pore lid
Afterwards, the second phase consists of a slightly more specific look to detect the oxide residues that will usually remain. They can appear as smooth structures due to sanding, or also in the form of lumps. The wire brush is the right tool for this stage of the process.
Then apply the solvent. A second coat of this component should be applied to ensure that there is no trace of rust. It should be allowed to dry. Next, the pore cap should be applied to those areas where rust has been present and its removal has caused some damage. The effect of the pore cap is powerful and will not allow rust spots to appear again in the areas where it was applied.
Then you can proceed to painting with the rust paint you have chosen. The use of spray paints is recommended where you can apply several coats of paint instead of just one. We should also allow to dry after each coat of paint.
Have you ever painted over rust in your life? Tell us about the experience and details presented in this process.
Are you interested in the subject of car painting? You can get more information about automotive paint in general.
View this article in spanish
Click this link to view the article “Paint for rust” in spanish
